OSHA Fall Protection in Residential Construction Resources & Training

Regulation

Directive

Presentations

Compliance Aids

Fall Protection in Residential Construction. OSHA Fact Sheet. [PDF - 259 KB]

Fall Protection in Residential Construction [Spanish]. OSHA Guidance Document. [PDF - 1 MB]

Other Resources

How can OSHA Help?

OSHA has developed this webpage to provide workers and employers useful, up-to-date information on residential fall protection. For other valuable worker protection information, such as Workers’ Rights, Employer Responsibilities and other services OSHA offers, read OSHA’s Workers page.

International Code Council Update – April 2012

April 2012

International Code Council Update

A New Chapter Education Benefit for 2012

By now, you may have heard that the ICC Board of Directors approved the introduction of an enhanced annual Chapter Education Benefit for 2012. For the past two years, ICC offered a Chapter Education Benefit of a 50 percent discount off of a training seminar. In that time, more than 160 Chapters have taken advantage of the benefit, bringing high-quality ICC training to their local audience. In recognition of the Year of the Member, and with the hopes of even greater Chapter exposure to ICC training, we are now expanding the benefit.

Beginning April 1, the enhanced Chapter Education Benefit will provide qualifying Chapters with a live training seminar at no cost to the Chapter. Qualifying Chapters are those that filed their annual chapter report in a timely manner.  After discussing options and gathering feedback from Chapter leaders, it became apparent that any changes to the benefit be structured to provide maximum value to the ICC Chapters and the organization as a whole. To that end, the following specific requirements will apply to the enhanced Chapter Education Benefit:

  • The benefit is available beginning April 1, 2012
  • Qualifying Chapters will receive either:
    • 1 complimentary live Fundamentals, Update, Significant Changes, or Transition training seminar, or
    • 1 complimentary live Performing, advanced or special topics one-day training seminar (legal and electrical seminars are not eligible) with the purchase of a second seminar
  • The Chapter will receive up to 30 complimentary sets of student materials (workbooks, handouts, etc.) for the no-cost seminar. Additional sets of materials for more than 30 students must be purchased at standard Chapter pricing
  • The Chapter may request, but is not guaranteed, a specific instructor

As with the current benefit, a Chapter will still be allowed to combine or donate its Chapter Education Benefit day. Visit our online catalog for a complete list of available classes. To schedule a Chapter Education Benefit seminar or for any other ICC education needs, please contact one of our Education Client Services Administrators at 1-888-ICC-SAFE (422-7233), extension 33818.

Important Pricing Announcement!

Effective April 1, ICC’s price adjustment will increase the pricing of I-Codes, Commentaries, and other select items in book, CD and PDF format. Shipping and handling charges will not increase. Please go to the link below to view a complete list of new prices.  http://iccstaff.iccsafe.org/
 

ICC Announces Availability of New Green Code

The 2012 International Green Construction Code is the path to safe, sustainable, economical construction. The model code for constructing and remodeling buildings is expected to make buildings more efficient, reduce waste, and have a positive impact on health, safety and community welfare. The IgCC will increase the energy-efficiency of structures, while providing direction and oversight of green design and construction. Click here to find out more about our newest code: http://www.iccsafe.org/cs/IGCC/Pages/default.aspx?r=IGCC

Proposed Code Changes for Group A Posted Online

Before heading to Dallas later this month, view the Group A proposed changes to the 2012 editions prior to the Code Development Hearings April 29-May 8 in Dallas. They’re all right here: http://www.iccsafe.org/cs/codes/Pages/12-13-ProposedChanges-A.aspx

2012 Group A Code Development Hearing Schedule Available.

The 2012 Code Development Hearings Schedule for Group A is posted on the ICC website here: http://www.iccsafe.org/cs/codes/Documents/2012-13cycle/2012HearingSchedule-Dallas.pdf. Registration is open for the April 29 – May 8 Hearings at the Sheraton Dallas Hotel at this web address: http://s3.goeshow.com/icc/12GACDH/ereg589395.cfm.

Code Change proposal errata is posted.   The link is:  http://www.iccsafe.org/cs/codes/Documents/2012-13cycle/Proposed-A/00a_errata-032212.pdfI-Code Exam Availability Update

Currently, 2012 I-Codes exams are paper and pencil only with computer-based testing available in January 2013. Computer-based and paper and pencil exams are available for the 2009 I-Codes. 2006 I-Codes exams are paper and pencil only. For more information, see the National Certification Examination Information Bulletin here: http://www.iccsafe.org/Accreditation/Bulletins/National_Certification_EIB.pdf

Draft of Guideline Available for Public Comment

The Society of Fire Protection Engineers, in collaboration with the International Code Council, has released the draft of the Guidelines for Designing Fire Safety in Very Tall Buildings for public comment. The submission deadline for public comments is June 8.

EPA Lead-Based Paint Poisoning Prevention Not A Local Official Issue

ICC has reviewed the federal EPA Lead-Based Paint regulations, and has determined that none of the regulations impose any responsibility for enforcement on local officials, nor are there any reporting or training requirements for local code officials. The regulations in question can be found here: http://ecfr.gpoaccess.gov/cgi/t/text/text-idx?c=ecfr&sid=2f538dffcc98fec4c62796eb1cdabcbd&rgn=div6&view=text&node=40:31.0.1.1.14.3&idno=40

2012 is the Year of the Member!

Every International Code Council Member contributes to building a safer world through their individual commitment to public safety. The International Code Council always focuses on its Members, but 2011-2012 is a special time as ICC celebrates the Year of the Member.  The Year of the Member recognizes the fact that ICC Members are industry leaders dedicated to building safe and sustainable communities.

Are you getting the most out of your membership? Click here to find out about all the opportunities you have as an ICC Member! http://www.iccsafe.org/Membership/Pages/YearOfTheMember.aspx

Call for Proposals: ICC/ANSI A117.1-09 – Accessible and Usable Buildings and Facilities

ICC Consensus Committee on Accessible and Usable Building and Facilities will be developing the next edition of the ANSI A117.1-09 standard. Suggested revisions or additions can be submitted to the ICC by completing the public proposal form, located here: http://www.iccsafe.org/cs/standards/Pages/publicforms.aspx. Remember, the deadline is July 2, so get your revisions in soon!

Call to Committee: ICC Accepting Applications for Exam Development Committee Members

Certification and Testing seeks volunteers to serve in several areas. View the responsibilities of Exam Development Committee here: http://www.iccsafe.org/Accreditation/Documents/EDC_Applicant_Snapshot_2011.pdf, and then apply today! Applications link here: http://www.iccsafe.org/Accreditation/Pages/EDC.aspx

ICC Membership Councils: New Opportunities to Enhance Your Profession and Career

The Membership Councils offer ICC Members a place to come together and be a more powerful force shaping your ICC, your industry, your career, and your future. The ICC Board, as part of ICC’s celebration of the “Year of the Member,” is pleased to announce five discipline-specific Membership Councils that will each serve to take your ICC Membership and profession to the next level. Share your expertise, voice, and vision with your peers – get started today!

ICC Membership Councils were formed after Members asked to have a greater role influencing how ICC serves to enhance Members’ work performance, careers and professions. ICC’s success is driven by the unity and diversity of its Members. The strength and solidarity of our organization allows us to better serve our membership and communities, and promote a shared vision of a safe and sustainable world.

Find out more about the new ICC Membership Councils here: http://www.iccsafe.org/Membership/Councils/Pages/default.aspx

Think You’re a Major Jurisdiction? Join the Committee!

The Major Jurisdiction Committee is open to representatives of state code enforcement agencies, the capital city of each state, the two largest jurisdictions in each state and jurisdictions with a population of 1,000,000 or more. Find out more about it here: http://www.iccsafe.org/cs/Pages/MJC.aspx

2012/2013 Code Change Cycle Information Available.

The Code Council has recently posted the Code Change Proposal form online for the 2012/2013 Code Change Cycle. That form is available as both a Word Document and PDF file here: http://www.iccsafe.org/cs/codes/Pages/publicforms.aspx .The list of the Group A and Group B Committees responsibilities also is available on ICC’s website here: http://www.iccsafe.org/responsibilities

Safety Photo of the Day: Why Having Effective Safety Guidelines for “Slips, Trips & Falls” Is Imperative

Slips, trips, and falls constitute the majority of general industry accidents. They cause 15% of all accidental deaths, and are second only to motor vehicles as a cause of fatalities. The OSHA standards for walking/working surfaces apply to all permanent places of employment, except where only domestic, mining, or agricultural work is performed.

Walking/working surfaces are addressed in specific standards for the general industry, shipyard employment, marine terminals, longshoring, and the construction industry.

OSHA Standards

This section highlights OSHA standards, the Regulatory Agenda (a list of actions being taken with regard to OSHA standards), directives (instructions for compliance officers), and standard interpretations (official letters of interpretation of the standards) related to walking/working surfaces.

Note: Twenty-five states, Puerto Rico and the Virgin Islands have OSHA-approved State Plans and have adopted their own standards and enforcement policies. For the most part, these States adopt standards that are identical to Federal OSHA. However, some States have adopted different standards applicable to this topic or may have different enforcement policies.

General Industry (29 CFR 1910)

Shipyard Employment (29 CFR 1915)

Marine Terminals (29 CFR 1917)

Longshoring (29 CFR 1918)

Construction Industry (29 CFR 1926)

Regulatory Agenda

Directives

Standard Interpretations

Hazards and Solutions

There are many situations that may cause slips, trips, and falls, such as ice, wet spots, grease, polished floors, loose flooring or carpeting, uneven walking surfaces, clutter, electrical cords, open desk drawers and filing cabinets, and damaged ladder steps. The controls needed to prevent these hazards are usually obvious, but too often ignored, such as keeping walkways and stairs clear of scrap and debris; coiling up extension cords, lines, and hoses when not in use; keeping electrical and other wires out of the way; wearing lug soles in icy weather; clearing parking lots, stairs, and walkways in snowy weather; and using salt/sand as needed. The following references provide information on walking/working surfaces hazards and prevention.

Hazard Evaluation

The following reference provides information regarding how to identify and evaluate hazards involving walking/working surfaces.

  • Construction. OSHA eTool. A Spanish version is also available. Helps workers identify and control the hazards that cause the most serious construction-related injuries.

Additional Information

Related Safety and Health Topics Pages

Training

  • Slips, Trips, and Falls. State Office of Risk Management (SORM).

Other Resources

OSHA QuickTakes – February 15, 2012

In this issue

OSHA’s free On-site Consultation Program helps fund innovative safety training center in Maine

Governor of Maine, Paul LePage and Director of Workplace Safety and Health, David Wacker
Governor of Maine, Paul LePage (left) and Director of Workplace Safety and Health, David Wacker (right) at the SafetyWorks! Grand Opening.

In addition to providing free and confidential advice to small and medium-sized businesses in all states across the country, OSHA’s On-site Consultation Program helped fund a new state-of-the-art SafetyWorks! Safety Training Institute in Augusta, Maine. The funding assistance from OSHA allowed Maine’s On-site Consultation Program, SafetyWorks!, to build the new Institute.

SafetyWorks! is an outreach program designed to reduce job-related injuries, illnesses and deaths and provide free training and consultation to Maine employers. The new SafetyWorks! Institute offers traditional classrooms as well as innovative hands-on training equipment, including a full-size fork lift, a confined space simulator and rescue station, an ergonomics station, an electrical panel and a scaffolding station. For more information see the news release.

State-of-the-art training equipment
State-of-the-art training equipment at the SafetyWorks! Institute.

Like Maine’s program, OSHA’s On-site Consultation services are separate from enforcement and do not result in penalties or citations. Consultants from state agencies or universities work with employers to identify workplace hazards, provide advice on compliance with OSHA standards, and assist in establishing safety and health management systems. To request an on-site consultation, call 1-800-321-OSHA [6742] or visit http://www.osha.gov/dcsp/smallbusiness/consult.html.
OSHA extends temporary enforcement measures in residential construction

OSHA will extend for six months its temporary enforcement measures in residential construction. The temporary enforcement measures, extended through September 15, 2012, include priority free on-site compliance assistance, penalty reductions, extended abatement dates, measures to assure consistency and increased outreach. Fatalities from falls are the number one cause of workplace death in construction.

Over the past year, OSHA has worked closely with the industry, conducting over 1,000 outreach sessions nationwide to assist employers in complying with the new directive. OSHA will continue to work with employers to ensure a clear understanding of, and to facilitate compliance with, the new policy.

OSHA’s Web page also has a wide variety of educational and training materials to assist employers with compliance, including multiple easy-to-read fact sheets, PowerPoint and slide presentations, as well as other educational materials. To access these materials, visit OSHA’s Fall Protection in Residential Construction page.

OSHA cites grain company after 2 teenage workers suffer leg amputations at Kremlin, Okla., facility

OSHA has cited Zaloudek Grain Co. with four serious safety violations following an incident involving two 17-year-olds in August 2011. Both suffered leg amputations when they became caught in an inadequately guarded screw auger while cleaning out a grain flat storage structure at the company’s facility in Kremlin. OSHA investigators found serious violations including failures to affix or secure the machine guard over the moving screw auger, provide training for workers assigned to enter grain structures, ensure the storage structure’s exit was free and unobstructed, and provide exit signs from the storage structure. Proposed penalties total $21,500. See the news release for more information.

In September, OSHA’s Oklahoma City Area Office opened a separate, comprehensive safety inspection of the Kremlin facility under the agency’s Regional Emphasis Program for Grain Handling Facilities that uncovered five additional serious violations. Citations, with fines totaling $12,500, were issued on Dec. 20 and contested by the employer.

OSHA has fined grain operators in Wisconsin, Illinois, Colorado, South Dakota, Ohio, Oklahoma and Nebraska following preventable fatalities and injuries in grain storage bins. In addition to enforcement actions, OSHA sent a notification letter to 13,000 grain elevator operators warning them of proper safety precautions.

OSHA proposes $365,500 in fines to Wal-Mart for repeat and serious safety and health hazards at Rochester, N.Y., store

OSHA cited Wal-Mart Stores Inc. for a total of 24 alleged repeat and serious violations of workplace safety and health standards at its supercenter store No. 2859 in Rochester. The Bentonville, Ark.-based retailer faces a total of $365,500 in proposed fines following inspections conducted by OSHA’s Buffalo Area Office initiated in response to a complaint.

The Rochester inspections led OSHA to identify fall hazards, obstructed exit routes, an absence of lockout/tagout procedures for energy sources that would allow workers to safely perform maintenance on a compactor, an unguarded grinder, no training for workers using personal protective equipment, a lack of eye and face protection, and a lack of information and training on hazardous chemicals in the workplace. These conditions resulted in citations for 10 repeat violations with $288,000 in fines. See the news release for more information.

IOSHA cites 3 employers following investigations after fatal injuries at 2011 Indiana State Fair

Indiana OSHA has cited three organizations involved in the Indiana State Fair accident on August 13, 2011 that resulted in fatal injuries of two workers. Fifty-eight people were injured and 7 were killed when a gust of wind toppled stage equipment just before the band Sugarland was scheduled to perform.

IOSHA cited the Indiana State Fair Commission with one serious violation for failure to conduct a life safety evaluation and cited Local 30 of the International Alliance of Theatrical Stage Employees for 3 serious violations. Violations included failure to consider soil conditions when placing cable anchor points for the grandstand stage; failure to provide fall protection for workers 4 feet or more above ground level; and, failure to conduct a personal protective equipment hazard assessment of the worksite to determine the personal protective equipment required while erecting the load bearing roof and the grandstand.

IOSHA also cited Mid-America Sound Corporation for 3 knowing violations, including failure to develop and implement an Operations Management Plan, failure to develop a risk assessment plan, failure to maintain and use current engineering calculations and documentation, and failure to provide appropriate, qualified supervision. See the news release* for more information.

OSHA proposes $169,000 in fines to Hartford, Conn., contractor for repeatedly exposing workers to cave-in hazards

OSHA proposed a total of $169,000 in fines against contractor Penney Construction Co. LLC, in Hartford, Conn., chiefly for exposing its workers to cave-in hazards while repairing a sewer line in a 10-foot-deep trench. An inspection by OSHA’s Hartford Area Office found that not only did the trench lack any protection to prevent the walls from collapsing onto workers, the cave-in hazard was intensified by the presence of an unsupported sidewalk and catch basin overhanging the trench. OSHA standards require that trenches or excavations 5 feet or deeper be protected against collapse through shoring, sloping of the soil or use of a protective trench box. Even after being informed that the conditions posed an imminent danger, the employer continued to send workers into the trench. Detailed information on trenching and excavation hazards as well as safe working procedures is available on the OSHA Web site.

OSHA has placed Penney Construction in its Severe Violator Enforcement Program, which mandates targeted follow-up inspections to ensure compliance with the law. Initiated in June 2010, the program focuses on recalcitrant employers that endanger workers by committing willful, repeat or failure-to-abate violations. See the news release for more information.

OSHA cites Beasley Forest Products in Georgia for combustible dust and other hazards; $78,000 proposed in penalties

OSHA has cited Beasley Forest Products Inc. for 21 safety and health violations at its Sandersville hardwood sawmill production facility. OSHA opened an inspection in October after receiving a complaint. Proposed penalties total $78,000.

Twelve serious safety violations involve failing to develop specific lockout/tagout procedures for the energy sources of equipment, properly use compressed air for cleaning, install guardrails on walkways to prevent workers from falling 5-18 feet, provide standard handrails on stairways, provide signage prohibiting unauthorized foot or vehicle traffic where logs were being loaded and unloaded, provide machine guards, repair a damaged ladder, allow access to the circuit breaker box, and install covers on electrical boxes for the sorter control cab and the sorter system.

Four serious health violations include failing to establish and implement a hazard communication program for workers exposed to combustible dust, prevent the accumulation of combustible dust, implement a hearing conservation program, and properly store oxygen and acetylene cylinders. See the news release for more information.

Secretary of Labor Hilda L. Solis promotes international worker rights through new collaborations

Secretary Solis and Minister Kharge
Secretary Solis and Minister Kharge, signing an historic memorandum of understanding for U.S.-India labor issues.

In two recent meetings, Secretary of Labor Hilda L. Solis pledged to collaborate on international worker rights issues. At a Feb. 1 meeting in Washington, D.C., Secretary of Labor Hilda L. Solis met with Colombia Minister of Labor Rafael Pardo to discuss Colombia’s recent achievements in protecting workers’ rights, address challenges that remain, and award a grant of $2 million to the International Labour Organization (ILO) to develop a robust presence in Colombia.

The following day, Secretary Solis and Minister of Labour and Employment Mallikarjun Kharge of the Republic of India signed a memorandum of understanding to encourage dialogue and cooperation between the United States and India on labor and employment issues. The memorandum will enable the Labor Department to begin dialogue with its counterpart in India occupation safety and health issues as well as other labor topics, with their counterparts in India.

New Mexico OSHA and Oil & Gas Association announce collaborative effort to increase worker safety

The New Mexico Occupational Health and Safety Bureau (NM OSHA) and the New Mexico Oil & Gas Association (NMOGA) signed an agreement Jan. 25 that establishes an alliance to foster safer and more healthful New Mexico workplaces. As part of the Alliance Agreement, a team of representatives from both organizations will meet quarterly to develop a plan of action, determine working procedures, and identify roles and responsibilities of the participants. The two organizations will also work together during state safety conferences and encourage participation from industry representatives through development of materials, training programs, workshops, seminars, and lectures. The Alliance will remain in effect for two years. See the news release* for more information.

New fact sheet provides information on protecting shipyard workers from eye injuries during welding and cutting operations

A new OSHA fact sheet, Eye Protection against Radiant Energy during Welding and Cutting in Shipyard Employment,* is intended to help prevent worker eye injuries in the maritime industry. Electromagnetic energy given off by an arc or flame, commonly referred to as radiant energy or light radiation, can injure workers’ eyes. For protection from radiant energy, employers must ensure that workers use the necessary personal protective equipment, such as safety glasses, goggles, welding helmets or welding face shields. This equipment must have filter lenses with a shade number that provides the appropriate level of protection. A shade number indicates the intensity of light radiation that is allowed to pass through a filter lens to one’s eyes. The higher the shade number, the darker the filter and the less light radiation that will pass through the lens. Tables in the fact sheet provide the proper shade numbers to be used under various conditions when performing welding operations including gas and metal arc welding and oxygen cutting.

Nurses’ miscarriages linked to chemicals at work

A new study from the National Institute for Occupational Safety and Health (NIOSH) has found a greater-than-expected risk of miscarriages among nurses exposed to hazardous substances at work. Occupational exposure to chemotherapy drugs and disinfectants were associated with increased risk of miscarriage. The published article is available in the American Journal of Obstetrics & Gynecology.

More workers are injured in the healthcare and social assistance industry sector than any other. Health care workers face a number of serious safety and health hazards, including bloodborne pathogens, chemicals, gases, lifting and repetitive tasks, workplace violence, radioactive materials, and x-rays. For more information, visit OSHA’s Safety and Health topics page about healthcare facilities.

NIOSH webinar today on workers’ compensation among health care workers

In a webinar today, February 15, the National Institute for Occupational Safety and Health (NIOSH) will address the use of intervention evaluation research to address the leading causes of workers’ compensation among health care workers.

Dr. Jim Collins, Associate Director for Science for the NIOSH Division of Safety Research will discuss how hazards in healthcare facilities can be understood by evaluating the injury risks associated with patient lifting, slips, trips, and falls. Webinar participants will learn “best practices” for safety and health and develop a plan for reducing risks at their own facilities.

The webcast, available here, will run from 12-1pm EST.

OSHA alerts workers to falls and other hazards when removing snow from rooftops

A new OSHA hazard alert warns workers of falls and other hazards that every year result in deaths and serious injuries during snow or ice removal from rooftops and elevated surfaces. Workers are at risk for falling off roof edges, through skylights, and from ladders and aerial lifts. Workers may also be injured or killed by a roof collapse. The alert provides methods for preventing these hazards, such as using snow removal methods that do not involve workers going on roofs, evaluating the maximum weight a roof or structure can bear, requiring that workers use fall protection equipment, and ensuring that workers use ladders and aerial lifts safely. Other hazards include injuries associated with the use of snow blowers and other mechanized equipment, entrapment and suffocation under falling snow drifts or snow piles, shock/electrocution hazards from contacting power lines or damaged extension cords, frostbite or hypothermia from cold and windy conditions and musculoskeletal injuries from overexertion.

OSHA also recently created a Winter Storms Web page to provide information on protecting workers from hazards during winter storm response and recovery operations.

Job openings

Are you interested in a career with the Department of Labor? DOL has job opportunities throughout the country, including openings in OSHA

ASSE Announces Approval of Two Key Safety Standards for the Construction and Demolition Industry


DES PLAINES, IL
(January 5, 2012) – The American Society of Safety Engineers (ASSE) announced today that the American National Standards Institute (ANSI) has approved two new ASSE A10 construction and demolition standards aimed at enhancing safety.

The two new standards approved are the ANSI/ASSE A10.1-2011 Pre-Project and Pre-Task Safety and Health Planning for Construction and Demolition Operations and the ANSI/ASSE A10.26-2011 Emergency Procedures for Construction and Demolition Sites.

The new A10.1-2011 standard establishes the elements and activities for pre-project and pre-task safety and health planning for construction. Its primary purpose is to assist construction owners, project constructors and contractors in making pre-project and pre-task safety and health planning a standard part of their planning processes and to assist owners in establishing a process for evaluating project constructor candidate safety and health performance and planning practices.

The new A10.26 standard applies to those emergency procedures involving: fires, collapses, hazardous spills and other emergencies that can endanger workers; emergency rescue of injured or ill workers or other persons, or of injured workers unable to rescue themselves; on-site provision of first aid and emergency medical care; evacuation and transportation of injured or ill workers to appropriate emergency medical facilities; pre-planning and coordination of emergency plan with emergency medical facilities; and training on emergency procedures/plans for workers and other groups. It also provides guidelines for the development of emergency procedures for construction sites.

“The A10 standards play an important role in providing technical guidance to the construction and demolition industry in order to prevent occupational fatalities, injuries, and illnesses,” Richard King, Chair of the A10 Committee, said today. “These two new standards build upon our existing documents to enhance work safety and health on construction sites.”

Founded in 1911, the 100-year-old Des Plaines, IL-based ASSE is the oldest professional safety society and is committed to protecting people, property and the environment. ASSE is secretariat for several ANSI committees and projects along with being the administrator for the U.S. Technical Advisory Groups (TAG) to the International Organization for Standardization (ISO) on fall protection and risk management. ASSE members also serve on more than 40 safety and health standards committees. For more information on standards please go to customerservice.

OSHA Releases 12 Educational Videos About Potential Hazards in the Construction Industry.

Trenching Safety Video

Public News Release
The U.S. Department of Labor‘s Occupational Safety and Health Administration has released 12 educational videos about potential hazards in the construction industry. The educational videos are easy to understand, short segments and geared to employers and workers. Each year, nearly 800 construction workers die on the job; one in every five workplace fatalities occurs within the construction industry. The videos are based on real-life incidents and include detailed depictions of hazards and the safety measures that would have prevented these injuries and fatalities.

“I urge anyone who works in the construction industry or operates a construction business to watch the videos. Share them with your co-workers and friends in the construction industry; organize screenings for your workers; and post them to your web pages,” said Assistant Secretary of Labor for Occupational Health and Safety Dr. David Michaels. “Every step we take to educate workers about their rights and the safety measures employers must take to protect workers in construction helps us avoid preventable injuries and the tragic loss of life.”

These videos cover falls in construction, workers who are struck by vehicles and heavy equipment, sprain and strain injuries, trenching and excavation hazards, and carbon monoxide poisoning. These videos are written for workers and employers, including workers with limited English proficiency.

Most of the videos are two to four minutes in length, and all but one are animated. Each video is available in English and Spanish for Web viewing or downloading. All video scripts are also available online in English and Spanish. The videos are located at http://www.osha..gov/dts/vtools/construction.html (Spanish-language videos are available at http://www.osha.gov/dts/vtools/construction_sp.html).